ABOUT US
 Yuneng Waterproof
|
 Yingde production base
|
MEDIA
 Corporate Information
|
 Corporate News
|
TECHNOLOGY
 GB chart
|
 Yu Neng Business School
|
CASE
 Rail Transit
|
 Export overseas works
|
COOPERATION
 Merchants joined
|
 contact us
|
YN-A500 Polymer (EVA/HDPE) Composite Self-Adhesive Waterproof Roll
DETAIL
产品规格
YN-A500 Polymer (EVA/HDPE) Composite Self-Adhesive Waterproof Membrane
Product Overview
YN-A500 Polymer Composite Self-Adhesive Waterproof Membrane is a type of self-adhesive waterproof membrane composed of a layer of silicone creep rubber asphalt self-adhesive glue and a polymer composite sheet. The polymer sheet includes high-performance materials such as HDPE, EVA, and ECB composite sheets. This material can be laid wet and can adopt the pre-laid inverted adhesion method. Different construction methods can be flexibly adopted according to different design requirements.
Product Features
- Excellent elongation and tear resistance.
- Resistance to chemical corrosion from various acids and alkalis.
- Strong physicochemical indicators with a service life of over 50 years.
- Excellent adhesive sealing performance.
Specification and Model
Thickness: 1.2mm/1.5mm/2.0mm
Width: 1.0m/1.5m/2.0m/3.0m
Length: 25m/20m/15m
Scope of Application
It is applicable to high-level and critical waterproofing projects such as green roofs, grain storage facilities, air-raid shelters, sewage treatment plants, artificial lakes, basements, tunnels, subways, high-speed railways, bridges, and landfill site seepage prevention.
Precautions
- Before bonding the seams of the membrane, avoid contamination of the overlapping surfaces with water, cement mortar, or dust to ensure proper seam adhesion.
- After completion, protect the waterproofing layer well and avoid damaging the membrane with metal or hard objects.
- After seam construction, inspect the seams of the membrane and seal any damage found with sealing material.
- The construction process should be carried out step by step without crossing over different stages.
- Avoid contact with organic solvents and keep away from fire sources.
- Store the membrane in a dry and well-ventilated environment to prevent exposure to sunlight and rain.
Construction Process
-
Pre-laid Inverted Adhesion Method
Clean the base surface → Treat local nodes → Pre-lay the waterproof membrane → Overlap edges, terminate, and seal → Remove the release paper on the membrane surface → Pour concrete -
Wet Laying Method
Clean the base surface → Prepare cement mortar → Treat nodes → Lay the waterproof membrane → Overlap and terminate → Seal → Carry out maintenance
Technical Specifications
Execution Standard: GB/T 35467-2017 (Wet Laying, Category E)
Execution Standard: GB/T 23457-2017 (Pre-laid, Category P)
REVIEW
